Welcome to the official website of Hangzhou Weihao Industrial Co., Ltd.!
Fax: +86-571-88866663 Email:sales@hzweibo.com
Language
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
02
2022
-
09
Next, let’s talk about installation tips for medical airtight doors.
Next, let’s talk about installation tips for medical airtight doors. Medical airtight doors are specialized medical doors with high air-tightness that have been widely used in hospitals for a long time. The selection of materials and the installation process for airtight doors require careful attention. As highly airtight special medical doors, they are frequently employed in many environments with stringent air-tightness requirements. Consequently, airtight doors are extensively utilized in settings such as hospitals and food processing plants. Now, let’s briefly introduce how to install medical airtight doors.
Next, let’s talk about installation tips for medical airtight doors.
How are medical airtight doors installed?
Medical airtight doors are highly airtight, specialized medical doors that have been widely used in hospitals for many years. The selection of materials and the installation of airtight doors require careful attention. As special medical doors with exceptionally high airtightness, they are frequently employed in environments where air-tightness is critically important. Consequently, airtight doors are extensively utilized in settings such as hospitals and food processing plants. Below, we’ll briefly introduce the steps involved in installing medical airtight doors.
1. First, we need to clean the doorway thoroughly and remove any excess material from the inside of the doorway, ensuring that both sides of the doorway are aligned vertically. To avoid any interference with the subsequent installation, it’s crucial to pay close attention to cleaning the doorway thoroughly at this stage.
2. Install the lifting shaft above the car door. Before installing the top shaft, be sure to check whether the model matches and whether there is any damage. If any parts are missing, replace them promptly—do not force the installation.
3. When you assemble the three profiles of the door frame, you’ll need to use screws or willow nails. At this point, you’ll need to tighten the screws properly—otherwise, if you don’t pay attention, it’ll be quite a hassle to retighten them later.
4. To install the ground axle, we need to cut a square hole in the ground according to the actual dimensions, fill it with mortar, and then secure the ground axle. To do this, we’ll use a plumb bob to align the center of gravity of the top axle precisely with the center of the ground bearing. Only after the cement has dried can we proceed to the next step.
5. Install the upper and lower shafts of the door body. During these operations, also pay attention to ensuring that the installation is secure and free of any looseness.
6. When installing the door, loosen the anti-theft locking screws on the door leaf. To ensure smooth opening and closing of the door leaf, apply lubricant to the floor hinge. This not only prolongs the service life of the hinge but also allows you to regularly apply lubricant during subsequent use, ensuring both comfort and proper maintenance of the door components.
7. Adjusting the door leaf: Loosen the cover plate, use a wrench to adjust the floor hinge screw, and fine-tune the door leaf at its top and bottom sides: Adjust the hexagonal screw on the lower hinge—turn it clockwise to raise the door leaf, and counterclockwise to lower it.
8. Tighten the anti-theft card screws.
9. After installing the closer, adjust the closing speed of the closer. Once the adjustment is complete, installation is finished.
The above is the general installation procedure for medical airtight doors. As highly functional doors, medical airtight doors require particular attention to their stability and securement throughout the entire installation process. When tightening screws, make sure to tighten them firmly—otherwise, if problems arise during later use, disassembling and reassembling the door will become quite troublesome.
Alright, that’s all for today’s explanation of the installation process for medical airtight doors. I hope this information has been helpful to you. Our company offers both medical airtight doors and medical lead doors. If you have any needs in this area, feel free to contact us directly. Wishing you all a happy life—see you again in our next episode!
Key words:
Follow the official account
Contact Information
Address: No. 288 Renliang Road, Renhe Town, Yuhang District, Hangzhou City, China
Postal code: 311107
TEL:+86571-88862355+86571-88914491
Fax: +86-571-8886663
EMAIL:sales (@hzweibo.com)
©2022 Hangzhou Weihao Industrial Co., Ltd.